Seventy-three products across four categories: air filtration, air distribution, air control, and the fabricated pieces that complete a system: all made in our own plant in Surat. Every item is made to your drawings and shipped pan-India.
73 of 73 products
G2–G4FCU Nylon Mesh Pre Filters
The washable first line of defence: Diamond nylon mesh that knocks down large dust, lint and debris before it reaches coils and finer media.
G2–G4FCU Nylon Mesh Pre Filters
The B-Star series: nylon mesh pre-filters sized and framed for fan coil units, washable at every service visit.
FCU Nylon Mesh Pre Filters
Eakon indoor dust filters at 10 and 20 micron: the room-side dust stage for indoor air conditioning units.
G2–G4FCU Nylon Mesh Pre Filters
The Advance series flat panel box filters in G2–G3: the bulk coarse stage for FCUs, small AHUs and general ventilation.
G2–G4FCU/AHU Pre & Panel Filters
V-Swas rod-type (RT) pre air box filters: the reusable G3/G4 stage for FCUs, package units and return-air paths.
G2–G4FCU/AHU Pre & Panel Filters
V-Swas panel-type (PT) pre air box filters: padded media panels for FCU and return-air coarse stages.
FCU/AHU Pre & Panel Filters
Accurate panel-type AHU pre filters in 10/20 micron: the workhorse first stage of a commercial AHU.
FCU/AHU Pre & Panel Filters
Accurate rod-type AHU pre filters in 10/10 micron: matched-stage pre-filtration for balanced dust loading.
M5–M6Microvee Fine & Bag Filters
Kaizen Microvee fine filter at M5: rigid deep-pleat 5 micron dust collection for commercial AHU second stages.
M5–M6Microvee Fine & Bag Filters
Kaizen Microvee fine filter at M6: the higher-arrestance 5 micron stage for demanding AHU second stages.
F7–F9Microvee Fine & Bag Filters
Kaizen Microvee F7: 3 micron fine filtration for pharma supply air and the modern office AHU.
F7–F9Microvee Fine & Bag Filters
Kaizen Microvee F8: 1 micron fine filtration, the last stage before HEPA in a staged filter train.
G2–G4Microvee Fine & Bag Filters
Pocketto bag pre filters at G4: 10 micron coarse capture with pocket-loads of dust holding for high-airflow AHUs.
M5–M6Microvee Fine & Bag Filters
Pocketto medium bag filters at M5: 5 micron pocket filtration bridging pre and fine stages.
F7–F9Microvee Fine & Bag Filters
Pocketto fine bag filters at F7: 3 micron pocket filtration with kilograms of dust holding for large AHUs.
F7–F9Microvee Fine & Bag Filters
Pocketto super fine bag filters at F9: 0.3 micron pocket filtration, the finest stage before HEPA.
H13–H14Clean Room HEPA & EPA Filters
Semi HEPA super fine filters at F9: 0.3 micron filtration where full HEPA is specified but H13 is more than needed.
H10–H12Clean Room HEPA & EPA Filters
Deep pleat EPA filters at H10–H12: 0.3 micron efficient particulate air stages for cleanrooms not yet HEPA-class.
H10–H12Air Filtration Products
Mini-pleat EPA filters at H10–H12: separator-less 0.3 micron packs with low pressure drop for tight housings.
H13–H14Clean Room HEPA & EPA Filters
H13 and H14 deep-pleat HEPA filters, 99.95% to 99.995% efficient at 0.3 µm, for cleanrooms, operation theatres and pharma.
H13–H14Clean Room HEPA & EPA Filters
High-flow HEPA at H13–H14: full 0.3 micron efficiency at elevated face velocities, for compact high-volume clean air.
H13–H14Clean Room HEPA & EPA Filters
HEPA filtration rated to 250°C and beyond: clean air for ovens, sterilization tunnels and hot process exhaust.
H13–H14Clean Room HEPA & EPA Filters
Separator-less mini-pleat HEPA at H13–H14: low pressure drop and full media utilisation in a sealed anodized frame.
H13–H14Clean Room HEPA & EPA Filters
Knife-edge HEPA filters that seal into a gel channel: zero-bypass terminal filtration for pharma ceiling modules and cleanroom housings.
G2–G4Carbon & Metallic Mesh Filters
Expanded aluminium mesh for the places ordinary filters give up: greasy kitchen exhaust, heavy dust and high-moisture air.
Carbon & Metallic Mesh Filters
Stainless wire mesh pre-filters for corrosive, hot and hygiene-washdown duty: the mesh filter that refuses to rust.
Carbon & Metallic Mesh Filters
Flat panel box carbon filters: thin, high-density odour control that drops into standard panel positions.
Carbon & Metallic Mesh Filters
Activated carbon media that adsorbs odours, gases and VOCs: for airport terminals, laboratories and kitchen exhaust scrubbing.
M5–M6Other Filtration Products
Two stages in one frame: a Duet G4 pre layer bonded ahead of an M6 medium layer, one filter, a complete coarse-to-medium train.
F7–F9Other Filtration Products
The Duet G4 + F7: coarse pre-filtration and fine filtration combined in a single rigid pack.
F7–F9Other Filtration Products
The Duet G4 + F7 bag: a pocket-format combination filter with coarse pre media and fine bag pockets.
Other Filtration Products
Gas-tight HEPA terminal housings: the ceiling and duct-end boxes that turn a HEPA filter into a validated terminal.
Other Filtration Products
Laminar flow plenum boxes: the pressure-fed chambers that deliver uniform velocity across entire HEPA ceilings.
Diffusers
One to four slots with adjustable pattern controllers: the modern architectural diffuser for premium interiors.
Diffusers
Grid-faced aluminium diffusers: the exposed-grid look with lay-in convenience for standard ceiling systems.
Diffusers
1, 2, 3 or 4-way blow patterns in a square ceiling diffuser: the core distribution unit for suspended ceilings.
Diffusers
Concentric-cone round diffusers: radial 360° discharge patterns for high-comfort zones and exposed-duct ceilings.
Diffusers
Plaque diffusers: a clean disc floating on a radial slot of air, the architect's favourite ceiling statement.
Diffusers
Fine-perforation faces that disappear into the ceiling: full diffusion performance behind an almost invisible plane.
Diffusers
Full SS304 ceiling diffusers: corrosion-proof, wash-down-ready terminals for kitchens, pharma and coastal plant.
Diffusers
High-induction swirl diffusers that mix supply and room air rapidly: comfort for variable-load commercial zones.
Jet Nozzles & Valves
High-throw eyeball jet nozzles with ±30° omnidirectional aim: air that travels up to thirty metres for airports, auditoriums and high-ceiling halls.
Jet Nozzles & Valves
Spot jet nozzles in trim rings: aim a column of air exactly where a person sits, theatre seats and workstation islands included.
Jet Nozzles & Valves
Stacked cones on a single carrier: shift the whole discharge pattern from horizontal to vertical without touching the ceiling.
Jet Nozzles & Valves
Helical-vane swirl jets: long throw with high induction, spinning supply air into comfort across tall spaces.
Jet Nozzles & Valves
Drum louver jets: cylindrical barrels of parallel vanes throwing wide bands of air across halls and factories.
Jet Nozzles & Valves
Sheet-metal disk valves: the adjustable-cone exhaust terminal for toilets, pantries and small extract points.
Jet Nozzles & Valves
Aluminium disk valves: the light, corrosion-free exhaust terminal for visible interiors and coastal duty.
Jet Nozzles & Valves
PVC disk valves: the corrosion-proof, non-metal exhaust terminal for chemical fume and coastal duty.
Grilles
Continuous-run linear bar grilles (0°, 15° or 30° fixed deflection) for perimeter and architectural applications.
Grilles
Square-faced swirl grilles: fixed radial vanes that spin supply air for rapid mixing in a clean architectural square.
Grilles
Curved-blade grilles: sculptural aluminium blades that direct air with a softer architectural line.
Grilles
Two blade sets, vertical and horizontal, for precise directional control of supply air in commercial spaces.
Grilles
One set of adjustable blades in extruded aluminium: the side-wall grille for supply and return where you want simple, reliable aim.
Grilles
Double deflection control with sculpted curved blades: full directional aim in a softer architectural profile.
Grilles
Round grilles with radially-set vanes: the circular terminal for round duct, exposed spigots and spiral-duct interiors.
Grilles
Decorative grilles: patterned and pierced faces that move air while reading as interior design, not hardware.
Dampers
Manual or motorized multi-blade dampers for balancing air volume across supply and return mains: the tap of the duct system.
Dampers
Aerofoil-blade VCDs: shaped blades that throttle high-airflow mains with less noise and turbulence than flat blades.
Dampers
Round VCDs: single-blade volume control for round ducts, spigots and branch take-offs.
Dampers
Weight-balanced dampers that automatically vent excess pressure: holding cleanroom and stairwell pressurization on target.
Dampers
Gravity-operated backdraft dampers that shut when the fan stops: no springs, no power, no backflow.
Dampers
Opposed-blade collar dampers: balancing built into the duct collar, adjusting each branch at its connection.
Dampers
Butterfly collar dampers: a single disc in the collar for simple, economical shut-off of round branch ducts.
Dampers
Fire-rated isolation dampers (1.5 and 3 hour ratings) that stop ducts carrying flame between fire compartments.
Dampers
Combined fire and smoke dampers: rated against flame and fitted with smoke detection and BMS signalling for life-safety zones.
Other Products
Drainable-blade fresh air louvers that let a building breathe while keeping monsoon rain, birds and insects out.
Other Products
Z-profile blade louvers: deeper chevron blades for heavier weather protection at exposed intakes and facades.
Other Products
Slim fixed-bar louvers for doors and partitions: letting air move between rooms without opening a door or cutting a ceiling.
Other Products
Gravity louvers in galvanized iron: blades that open on airflow and close by their own weight when the fan stops.
Other Products
Return air risers: fabricated vertical duct sections that carry return air between floors and back to the plant.
Other Products
Factory-built GI plenum boxes for every diffuser: spigot, damper and acoustic options, made to the ceiling you actually have.
Other Products
Wire-helix flexible ducts, insulated or plain: the last metre from main duct to diffuser, bending where sheet metal won't.
Terminal selection
Perimeter and sill installations want grilles: aimable blades that direct air along a surface. Occupied ceilings want diffusers: swirl or radial faces that mix air into the room within a short distance. Very tall or long spaces want jet nozzles: focused columns that keep their energy across throws ordinary terminals cannot reach. Exhaust points want disk valves.
| Terminal | Discharge pattern | Best for | Keep it away from |
|---|---|---|---|
| Grille (single / double deflection) | Flat, aimable sheet of air | Perimeter and sill supply, return and exhaust, under-window runs | Wide occupied ceilings, where mixing matters more than aim |
| Linear slot diffuser | Continuous directional line | Modern office ceilings and architectural perimeters | Long-throw duty in tall halls |
| Ceiling / swirl diffuser | Radial or swirling, high induction | Offices, hospitals, hotels: occupied ceilings | Very tall spaces, where air must travel far |
| Jet nozzle | Focused column, long throw | Airports, auditoriums, stadiums, high-ceiling halls | Low ceilings, where a focused jet becomes a draft |
| Disk valve | Conical spread or tight jet | Toilet and pantry exhaust, spot supply | Large supply zones |
Longer answers: grille or diffuser? and what throw distance really means. The terminals live in Air Distribution Products; the valves that balance them in Air Control Products.