AirVent HVAC Air Distribution Products
AirVent is the air distribution house: every grille, diffuser, jet nozzle, disk valve, damper, louver and fabricated duct piece in the catalogue carries its mark. From thirty-metre-throw nozzles for airport halls to the disk valve on a toilet extract, all of it is extruded, formed and assembled in the same Surat plant.
Catalogue products
40
Product lines
Air vent products, Air diffusers & grilles, Jet nozzles & valves, Air & fire dampers
Made in
Surat, Gujarat, India
One to four slots with adjustable pattern controllers: the modern architectural diffuser for premium interiors.
View productGrid-faced aluminium diffusers: the exposed-grid look with lay-in convenience for standard ceiling systems.
View product1, 2, 3 or 4-way blow patterns in a square ceiling diffuser: the core distribution unit for suspended ceilings.
View productConcentric-cone round diffusers: radial 360° discharge patterns for high-comfort zones and exposed-duct ceilings.
View productPlaque diffusers: a clean disc floating on a radial slot of air, the architect's favourite ceiling statement.
View productFine-perforation faces that disappear into the ceiling: full diffusion performance behind an almost invisible plane.
View productFull SS304 ceiling diffusers: corrosion-proof, wash-down-ready terminals for kitchens, pharma and coastal plant.
View productHigh-induction swirl diffusers that mix supply and room air rapidly: comfort for variable-load commercial zones.
View product
High-throw eyeball jet nozzles with ±30° omnidirectional aim: air that travels up to thirty metres for airports, auditoriums and high-ceiling halls.
View productSpot jet nozzles in trim rings: aim a column of air exactly where a person sits, theatre seats and workstation islands included.
View productStacked cones on a single carrier: shift the whole discharge pattern from horizontal to vertical without touching the ceiling.
View productHelical-vane swirl jets: long throw with high induction, spinning supply air into comfort across tall spaces.
View productDrum louver jets: cylindrical barrels of parallel vanes throwing wide bands of air across halls and factories.
View product
Sheet-metal disk valves: the adjustable-cone exhaust terminal for toilets, pantries and small extract points.
View productAluminium disk valves: the light, corrosion-free exhaust terminal for visible interiors and coastal duty.
View productPVC disk valves: the corrosion-proof, non-metal exhaust terminal for chemical fume and coastal duty.
View productContinuous-run linear bar grilles (0°, 15° or 30° fixed deflection) for perimeter and architectural applications.
View productSquare-faced swirl grilles: fixed radial vanes that spin supply air for rapid mixing in a clean architectural square.
View productCurved-blade grilles: sculptural aluminium blades that direct air with a softer architectural line.
View productTwo blade sets, vertical and horizontal, for precise directional control of supply air in commercial spaces.
View productOne set of adjustable blades in extruded aluminium: the side-wall grille for supply and return where you want simple, reliable aim.
View productDouble deflection control with sculpted curved blades: full directional aim in a softer architectural profile.
View productRound grilles with radially-set vanes: the circular terminal for round duct, exposed spigots and spiral-duct interiors.
View productDecorative grilles: patterned and pierced faces that move air while reading as interior design, not hardware.
View product
Manual or motorized multi-blade dampers for balancing air volume across supply and return mains: the tap of the duct system.
View productAerofoil-blade VCDs: shaped blades that throttle high-airflow mains with less noise and turbulence than flat blades.
View productRound VCDs: single-blade volume control for round ducts, spigots and branch take-offs.
View productWeight-balanced dampers that automatically vent excess pressure: holding cleanroom and stairwell pressurization on target.
View productGravity-operated backdraft dampers that shut when the fan stops: no springs, no power, no backflow.
View productOpposed-blade collar dampers: balancing built into the duct collar, adjusting each branch at its connection.
View productButterfly collar dampers: a single disc in the collar for simple, economical shut-off of round branch ducts.
View productFire-rated isolation dampers (1.5 and 3 hour ratings) that stop ducts carrying flame between fire compartments.
View productCombined fire and smoke dampers: rated against flame and fitted with smoke detection and BMS signalling for life-safety zones.
View product
Drainable-blade fresh air louvers that let a building breathe while keeping monsoon rain, birds and insects out.
View productZ-profile blade louvers: deeper chevron blades for heavier weather protection at exposed intakes and facades.
View productSlim fixed-bar louvers for doors and partitions: letting air move between rooms without opening a door or cutting a ceiling.
View productGravity louvers in galvanized iron: blades that open on airflow and close by their own weight when the fan stops.
View product
Return air risers: fabricated vertical duct sections that carry return air between floors and back to the plant.
View productFactory-built GI plenum boxes for every diffuser: spigot, damper and acoustic options, made to the ceiling you actually have.
View productWire-helix flexible ducts, insulated or plain: the last metre from main duct to diffuser, bending where sheet metal won't.
View product